host#show ipv6 mroute statistics
IPv6 Multicast Routing Table
(S, G) uptime d h:m:s[, expires d h:m:s]
[Admission bandwidth: bps]
[QoS bandwidth: bps]
RPF route: addr/mask, incoming interface
neighbor address, owner route-owner
Incoming interface list:
Interface (addr/mask), State/Owner [(RPF IIF)]
Outgoing interface list:
Interface (addr/mask), State/Owner, Uptime/Expires
(10:0:0:1:1::, ff0e::1) uptime 0 01:05:23
Admission bandwidth:
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:23/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts
(10:0:0:1:2::, ff0e::1) uptime 0 01:05:23
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:26/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts
• See show ipv6 mroute.
show ipv6 mroute summary
• Use to display a summary of all or specified multicast routes.
• Specify a multicast group IP address or both a multicast group IP address and a
multicast source IP address to display information about a particular multicast
forwarding entry.
• Field descriptions
• Group Address—IP address of the multicast group
• Source Address—IP address of the multicast source
• RPF Route—IP address and network mask of the RPF route
• RPF Iif—Type and identifier for the incoming interface for the RPF route
• #Oifs—Number of outgoing interfaces
• Counts—Numbers of types of (S,G) mappings
171Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Configuring IPv6 Multicast
To Next Page
Loading...