Juniper SRX380 - Securing Front Brackets to Rails; Securing Mounting Rails to SRX380; Positioning SRX380 in Rack

Maintaining Components
4
Maintaining SRX380 Components | 60
Routine Maintenance Procedures for the SRX380 Services Gateway | 60
Maintaining the SRX380 Services Gateway Cooling System Components | 60
Maintaining the SRX380 Services Gateway Power Supply | 60
Removing and Installing SRX380 Power System Components | 61
Remove an AC Power Supply on SRX380 Devices | 62
Install an AC Power Supply on SRX380 Devices | 63
Removing and Installing Mini-PIMs | 65
Remove a Mini-Physical Interface Module | 65
Install a Mini-Physical Interface Module | 66
Contacting Customer Support and Returning the Chassis or Components
5
Returning the SRX380 Chassis or Components | 69
Contacting Customer Support | 69
Returning an SRX380 Services Gateway or Component to Juniper Networks | 70
Locating the Chassis Serial Number | 70
Locating the Mini-PIM Serial Number Label | 71
Listing the SRX380 Services Gateway Component Details by Using the CLI | 71
Required Tools and Parts for Packing the SRX Series Services Gateway | 72
Packing the SRX Series Services Gateway for Shipment | 72
Packing SRX Series Services Gateway Components for Shipment | 73
Safety and Compliance Information
6
Definitions of Safety Warning Levels | 76
General Safety Guidelines and Warnings | 79
Restricted Access Warning | 81
Qualified Personnel Warning | 84
Prevention of Electrostatic Discharge Damage | 84
v