JVC GR-DV3 - Grip Strap Attachment

14 .
GripStrapAttachment
Pad START/STOP
Pad
Bottom of
c_lnl_oi'del-
Sub hand strap eyelet
ATTACH GRIP STRAP TO HAND
ST_P EYELET
Open tile pad and pull tile grip strap in the
direction of the arrow to remove the grip strap
from the pad.
Thread the end of the grip strap through the
hand strap eyelet, then thread the other end of
the grip through the loop. Pull firmly t() ensure
SeCLIFe attachment.
oTo use the strap as a hand strap, thread the
strap through the length adjuster when
attaching it to the camcorder.
ATTACH GRIP STRAP TO SUB
HAND STRAP EYELET
Open the pad mid thread the grip strap through
the pad. Next, thread the end of the grip strap
through the sub hand strap eyelet.
ADJUST LENGTH
Adjust so that your thumb and fingers can
easily operate the START/STOP button and the
zoom switch t[_. Position the pad so that it
contacts the back of your hand and thread the
grip strap through the length adjuster _, then
le-attach the pad O.