1 6EN
RemoteControlUnil
You can use the RM-V712U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is apprr)x. 5 m. Tile transmitted beam
may not be effective or may cause incorrect operation if tile remote sensor is directly exposed to sunlight or
powerful lighting.
START/STOP Button (_-T_ pg. 18)
PAUSE iN connector (_-T_pg. 61)
Zoom Buttons (_T_ pg.
DISPLAY
(_T_ pg. 58)
R.A. EDIT Buttons (_T_ pg. 61 - 63)
MONITOR Button
(_T_pg. 51)
Knob
Installing The Battery
The RM-V712U uses one lithium b,'lttery ((R202S).
PULL OUT BATTERY HOLDER
Pull out in the dJrectJolqof the arrow while
pressing the I<nob as shown.
INSERT BATTERY IN HOLDER
Insertthe battery in tile holder, and be sure to
have the "+" mark visible.
RE'INSERT HOLDER
Slide the holder b_¢l< in until you he_r a click.
• Read the warning concerning lithium
batteries (_-T_ pg. 2).
To Next Page
Loading...
