Kaba access manager 92 30 User Manual

Technical Manual Start-up
7504045376 - 05/2016Kaba access manager 92 30
6.4.5 Network settings
Function call: Menu > SETTINGS > Network > Network Settings
Getting an IP address from the DHCP server
1. Tick “Enable DHCP”.
2. Enter the IP address of the DNS server in the “DNS Server Address” input field. En-
ter 0.0.0.0 if no DNS server is to be used in the network.
Requesting the IP address from the DHCP server on the basis of the terminal
name
1. Tick “Enable DHCP”.
2. Enter the “Terminal Name” and “Terminal Domain Name” according to RFC 1123.
3. Enter the IP address of the DNS server in the “DNS Server Address” input field. En-
ter 0.0.0.0 if no DNS server is to be used in the network.
Assigning a permanent IP address
1. Enable “Static network configuration”.
2. Enter the desired IP address of the device in the “Terminal IP Address” input field.
3. Enter the netmask in the “Netmask” input field.
4. If the device and the host PC are in different network segments, you will have to
enter the gateway IP address that connects the network segments in the “Gate-
way IP address” input field. Enter 0.0.0.0 if no gateway is available.
5. Enter the IP address of the DNS server in the “DNS Server Address” input field. En-
ter 0.0.0.0 if no DNS server is to be used in the network.

Kaba access manager 92 30 Specifications

General

Brand	Kaba
Model	access manager 92 30
Category	Wireless Access Point
Language	English