Problem: Your TNC Stops Behaving Normally
Pacterm is intended for use with a TNC in NEWUSER or TERMINAL Interface
Mode (or, less often, in BBS or GPS Interface Mode), but it may receive data
from the TNC in any Interface Mode. Non-response, garbled data, or partially
garbled data may indicate the TNC has been switched to HOST or KISS mode
and needs to be switched back to NEWUSER or TERMINAL. See the TNC doc
-
umentation for instructions on how to determine what Interface Mode your TNC
is in currently and how to change it to the Interface Mode you want (NEWUSER
or TERMINAL).
Pacterm v 2.0 Trouble-Shooting Difficulties in
User’s Guide 96 KAM’98 v 8.3
To Next Page
Loading...