Kantronics KAM 98 - Connect Callsign [Stay]; Help; Jheard [Short|Long]

Connect callsign [Stay]
Causes the node to issue a connect request to “callsign” in the usual AX.25
mode. If the connect is successful, a link will be made to the next node or
end-user station called. The optional Stay feature provides a way to disconnect
without loosing the entire link. Normally when a disconnect occurs, whether is
-
sued by you or by the remote station, the connection to the KA-Node is also lost.
Using the Stay option allows you to stay connected to the KA-Node when the re
-
mote station issues a disconnect.
Help
Causes the KA-Node to send a brief help list, showing all commands available,
with the options and a short description of each command.
Jheard [Short|Long]
Causes the KA-Node to transmit its MHEARD log. The returned list (without the
short or long option) may look like this:
(HF/VHF Multi-Port)
LAWKAN/H* 01/09/88 08:25:15
N66046/V 01/10/88 00:03:10
NØKN-3/H 01/10/88 00:03:19
NØGZZ/V 01/10/88 00:04:15
(VHF/UHF Multi-Port)
LAWKAN/1* 01/09/88 08:25:15
N66046/2 01/10/88 00:03:10
NØKN-3/1 01/10/88 00:03:19
NØGZZ/2 01/10/88 00:04:15
(Single-Port)
LAWKAN 01/09/88 08:25:15
N66046* 01/10/88 00:03:10
NØKN-3 01/10/88 00:03:19
NØGZZ 01/10/88 00:04:15
KA-Node Packet Modes of Operation
KAM’98 v 8.3 207 User’s Guide