Step 4. After you have completed your conversation, simply
press <Ctrl+C> to return your KAM’98 to the command
mode (“cmd:” will be displayed) and then you can in
-
struct your KAM’98 to disconnect as you did above with
the mailbox, by entering D (or the full form,
DISCONNE) and return.
Other Topics
As you begin working with your KAM’98 packet radio station, other topics that
you may wish to explore (with the help of other sections of this manual) include:
• doing hard and soft resets,
• communicating via digipeaters (relays) with a distant station,
• using network nodes, and
• working with a GPS device.
This concludes a quick tour of basic uses of your KAM’98. With just these ba-
sics, you can do a lot, but you have a great deal more power if you want to ex-
plore the full possibilities.
For more information on all the topics we have covered here, and more, see the
following chapters in this manual.
Other Topics Getting Started
KAM’98 v 8.3 113 User’s Guide
To Next Page
Loading...