RH n
The RH (Read with headers) command is a variation of the Read command.
Using RH instead of R gives you message headers as well as the other informa
-
tion provided by the Read command. The message header contains the date/time
the message was received at each forwarding BBS along the path to your station.
RM(ine)
Displays all messages in the PBBS addressed to you that you have not already
read.
S(end) call
Sends a PRIVATE message to the callsign specified. Using S(end) is the same as
using the SP command.
SB cat
The SB (Send Bulletin) command is used to send a BULLETIN to the PBBS.
SP call
The SP (Send Private) command is used to send a PRIVATE message to a speci
-
fied callsign. Using this command is the same as using the S(end) command.
ST zip
The ST (Send Traffic) command is used to send NTS type traffic messages to the
PBBS.
Some of these commands are described in more detail below.
PBBS (Personal Mailbox) Packet Modes of Operation
KAM’98 v 8.3 165 User’s Guide
To Next Page
Loading...