“SIGNAL GROUND” to signal ground (pin 7) on the KAM’98. Your GPS re
-
ceiver may require other pins to be connected, check its documentation.
See your GPS manual and the chapter in this manual on “GPS NMEA
Interfacing Capability” for details on using your GPS device with your KAM’98
based multi-mode digital radio station.
+
For more information on installation topics, see the Advanced Installation Ap
-
pendix.
Your KAM’98 is now installed and ready to use. You may now go to the “Getting
Started” chapter, to learn how to do the basic operations with your KAM’98.
Since you used the next chapter (“Pacterm 2.0”) as part of the installation pro-
cess, you can now skip over to the chapter on “Modes of Operation” and get
started using your KAM’98.
Installing Your KAM’98 Connecting to a GPS Device (Optional)
User’s Guide 68 KAM’98 v 8.3
To Next Page
Loading...