To Next Page

To Previous Page

BASIC SAFETY INSTRUCTIONS

1.2 Transport, storage and proper use

Thetransport iscarried outby qualied persons in accordancewith the environmen-

talconditionsspeciedinthismanual.Thefiltersshallbeprotectedagainstexcessive

strains.

Donotstorethelters

• in the environment of aggressive and/or conductive liquids or gases.

• with direct sunlight.

• outsidethespeciedenvironmentalconditions.

1 Basic Safety Instructions

The COMBIVERT is designed and constructed in accordance with state-of-the-art tech-

nology and the recognised safety rules and regulations However, the use of such de-

vices may cause functional hazards for life and limb of the user or third parties, or dama-

ges to the system and other material property.

The following safety instructions have been created by the manufacturer for the area of

electric drive technology. They can be supplemented by local, country- or application-

specic safety instructions. This list is not exhaustive. Non-observance of the safety

instructions by the customer, user or other third party leads to the loss of all resulting

claims against the manufacturer.

NOTICE

Hazards and risks through ignorance.

► Read the instructions for use !

► Observe the safety and warning instructions !

► If anything is unclear, please contact KEB Automation KG !

1.1 Target group

This instruction manual is determined exclusively for electrical personnel. Electrical per-

sonnelforthepurposeofthisinstructionmanualmusthavethefollowingqualications:

• Knowledge and understanding of the safety instructions.

• Skills for installation and assembly.

• Start-up and operation of the product.

• Understanding of the function in the used machine.

• Detection of hazards and risks of the electrical drive technology.

• Knowledge of DIN IEC 60364-5-54.

• Knowledge of national safety regulations.

KEB COMBILINE Z2 Series User Manual

Questions and Answers: