46
INSTALLATION AND CONNECTION
4.7 Control cabinet installation
Power loss for the control cabinet dimension => „Electrical data of the motor chokes“. A
lower value can be used here depending on the load / frequency.
NOTICE
Destruction of the output lters due to overheating!
► Keep distance to other components !
► Do not ventilate the devices with preheated air from other compo-
nents !
4.7.1 Installation position of the motor chokes
Material number Installation position
07Z2F04-1003…12Z2F04-1003 Hanging, vertical
13Z2F04-100x…30Z2F04-100x Standing
Illustrations of the motor chokes in installation position are listed in chapter
=> „Dimensions and weights“.
4.7.2 Installation position of the capacitor modules
Material number Installation position
00Z2G24-00x1...00Z2G24-00x4 Standing
00Z2G24-00x5...00Z2G24-00x7 Hanging
Illustrations of the capacitor modules in installation position are listed in chapter
=> „Dimensions and weights“.