KEB COMBIVERT H6 Series

13
STANDARDS FOR DRIVE CONVERTERS / CONTROL CABINETS
EN61000-4-5 Electromagneticcompatibility(EMC)-Part4-5:Testingandmeasurement
techniques-Surgeimmunitytest(IEC61000-4-5);GermanversionEN61000-4-5
EN61000-4-6 Electromagneticcompatibility(EMC)-Part4-6:Testingandmeasurement
techniques - Immunity to conducted disturbances, induced by radio-frequency
elds(IEC61000-4-6);GermanversionEN61000-4-6
EN61000-4-34 Electromagneticcompatibility(EMC)-Part4-34:Testingandmeasurement
techniques - Voltage dips, short interruptions and voltage variations immunity
testsforequipmentwithmainscurrentmorethan16Aperphase(IEC61000-4-
34);GermanversionEN61000-4-34
EN61508-1...7 Functionalsafetyofelectrical/electronic/programmableelectronicsafety-related
systems–Part1...7(VDE0803-1…7,IEC61508-1…7)
EN62061 Safetyofmachinery-functionalsafetyofelectrical,electronicandprogram-
mableelectronicsafety-relatedsystems(VDE0113-50,IEC62061)
ENISO13849-1 Safetyofmachinery-safety-relatedpartsofcontrolsystems-Part1:General
principlesfordesign(ISO13849-1);GermanversionENISO13849-1
Standards that are used in the environment of the drive converter
DGUV regulation 3 Electrical installations and equipment
DIN46228-1 Wire-endferrules;Tubewithoutplasticsleeve
DIN46228-4 Wire-endferrules;Tubewithplasticsleeve
DINIEC60364-5-54 Low-voltageelectricalinstallations-Part5-54:Selectionanderectionof
electrical equipment - Earthing arrangements, protective conductors and protec-
tivebondingconductors(IEC64/1610/CD)
DINVDE0100-729 Low-voltageelectricalinstallations-Part7-729:Requirementsforspecial
installationsorlocations-Operatingormaintenancegangways(IEC60364-7-
729:2007,modied);GermanimplementationHD60364-7-729:2009
DNVGL-CG-0339 Environmentaltestspecicationforelectrical,electronicandprogrammable
equipment and systems
EN1037 Safetyofmachinery-Preventionofunexpectedstart-up;GermanversionEN1037
EN12502-1...5 Protectionofmetallicmaterialsagainstcorrosion-Part1...5
EN60204-1 Safetyofmachinery-electricalequipmentofmachinesPart1:Generalrequire-
ments(VDE0113-1,IEC44/709/CDV)
EN60439-1 Low-voltageswitchgearandcontrolgearassemblies-Part1:Type-testedand
partiallytype-testedassemblies(IEC60439-1);GermanversionEN60439-1
EN60947-7-1 Low-voltageswitchgearandcontrolgear-Part7-1:Ancillaryequipment-
Terminalblocksforcopperconductors(IEC60947-7-1:2009);Germanversion
EN60947-7-1:2009
EN60947-8 Low-voltageswitchgearandcontrolgear-Part8:Controlunitsforbuilt-in
thermalprotection(PTC)forrotatingelectricalmachines(IEC60947-8:2003+
A1:2006+A2:2011)
EN 61373 Railway applications - Rolling stock equipment - Shock and vibration tests (IEC
61373); German version EN 61373
EN 61439-1 Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC
121B/40/CDV);GermanversionFprEN61439-1
VGB R 455 P Water treatment and use of materials in cooling systems
ISO4017 Fasteners-Hexagonheadscrews-ProductgradesAandB
ISO 4762 Hexagon socket head cap screws
ISO7090 Plainwashers,chamfered-Normalseries-ProductgradeA
ISO7092 Plainwashers-Smallseries-ProductgradeA
ISO7045 PanheadscrewswithtypeHortypeZcrossrecess-ProductgradeA