5 Certication
5.1 CE-Marking
CE marked drive converters and servo drives were developed and manufactured to
comply with the regulations of the Low-Voltage Directive and EMC Directive.
The COMBIVERT meets the requirements of the Low-Voltage Directive. The harmo-
nized standards of the series EN 61800-5-1 for drive converters were used.
The COMBIVERT is a product of limited availability in accordance with EN 61800-3. This
product may cause radio interference in residential areas. In this case the operator may
need to take corresponding measures.
Depending on the design, the machine directive, EMC directive, Low Voltage Directive
and other directives and regulations must be observed.
5.2 UL Marking
- In preparation -
65
CERTIFICATION
To Next Page
Loading...
Need help?
General
