Need help?Do you have a question about the Keba KeContact Series and is the answer not in the manual?
General| Charging power | Up to 22 kW |
|---|---|
| Protection class | IP54 |
| Frequency | 50/60 Hz |
| Operating Temperature | -25°C to +55°C |
| Rated current | 32 A |
| Connection type | Type 2 socket |
| Communication | Ethernet |
| Residual current monitoring | Type A |
| Output Current | Up to 32 A |
Essential safety guidelines for operating and installing the KeContact M10 system and associated devices.
Explains the communication standards (Mode 3 and ISO 15118) supported for EV charging.
Specifies the requirement for a single common power line for all Wallboxes for effective load management.
Provides recommendations for flawless ISO 15118 communication, including PLC blocking filters.
Details the Ethernet wiring standards and pin assignments for connecting KeContact M10 and Wallboxes.
Explains how to assign unique addresses and IP addresses to Wallboxes using DIP switches.
Describes the function and configuration of DIP switches for addressing and setting up the charging station.
Details how to access the load management program via web browser using ETH0 or ETH1 connections.
Explains the login process, user authentication, and session timeouts for accessing protected features.
Describes the Home screen which displays the global status of all connected Wallboxes.
Outlines the process of supervising the day-to-day operation of the Charge Point.
Details the load management strategy parameters, including charging strategy and energy pricing.
Configures authorization settings for charging sessions, including token learning and acceptance.
Configures meter value publication, collection types, and power control actions for EVs.
Manages power profiles, defining charging limits based on time and day.
Allows configuration of Charge Point and Wallbox parameters for system operation.
Configures general parameters for the Charge Point, such as ID, name, and operating mode.
Sets core Charge Point parameters like nominal voltage, max current, and internet access.
Configures load management settings, including charging strategy, minimum current, and energy pricing.
Sets up authorization mechanisms for charging, including RFID and EVCCID support.
Configures meter reading collection and power control actions for electric vehicles.
Guides through the initial installation or update installation process for the KeContact M10 system.
Manages software updates for the KeContact M10 system, including upload and installation.
Handles firmware updates for the connected Wallboxes to ensure optimal performance.
To Next Page
