Hardware installation
24 / 156
4.6 KeContact M10 MMI menu
The MMI menu (Man-Machine-Interface) on the KeCon-
tact M10 is shown on a two line display with 16 charac-
ters in each line.
Buttons
The MMI menu can be operated with the following buttons:
For the selection of a menu item or the starting of a function press the [ENTER] button:
For the navigation within the menu press the [DOWN] or [UP] button:
Exit a menu or cancel a function with the [ESC] button:
For more details about the KeContact M10, please see the “Kemro KeContact M10 Project Engi-
neering manual”.
To Next Page
Loading...
