EasyManua.ls Logo

Keba KeContact Series - Current Allocation on Multiple Vehicles

Keba KeContact Series
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System configuration information
14 / 156
3.1.3 Current allocation on multiple vehicles
The allocation of quotas follows the FIFO principle (First-in-First out), the charging current quotas for Mode 3
charging and ISO charging will be considered separately.
Section ISO charging
If the total charging current of the EVs in the ISO charging group exceeds the limit, a new added vehicle (in
the example "ISO4") will not be charged immediately. The vehicle "ISO4" is shifted for a later moment, until
the consumption of the other EVs in the ISO group is going down and a quota is available.
Section Mode 3 charging
If the total charging current of the EVs in the Mode 3 charging group exceeds the limit, a new added vehicle
(in the example “M3-1”) can be charged anyway, if there is a free quota in the ISO charging group. The vehi-
cle “M3-1” will be charged until the ISO quota is needed again. If this happens, the charging current for the
Mode 3 charging vehicles is reduced accordingly. ISO charging vehicles always have higher priority.

Table of Contents

Related product manuals