Keba KeContact Series - Login and Access Control

Load management program
33 / 156
6.2.1 Login
Some functions of the Load management program may require a Login with Username and Password.
Login screen
Buttons
Login:
Enter “User name” and “Password” and press the [Login] button to ac-
cess the KeContact Load management program.
If the user doesn't work with one of the password protected screens for
15 minutes, it will be automatically logged out.
Change Password:
Press the [Change Password] button to go to the change password
screens.
Typical workflow: Using password protected screens
The user wants to enter a password-protected area, but is not logged in or is logged in with an account that
doesn’t have the right to access the area. The user selects a screen in the password-protected area typically
by pressing a button in the toolbar at the bottom of the screen.
►
The KeContact M10 presents the login screen.
Enter Username and Password and press the [Login] button. The screen selected will be shown.
►
Please press the [Logout] button in the toolbar after performing the work in the password
protected area. The HOME screen appears.