Keba KeContact Series - Charge Point Configuration; General Tab

Load management program
68 / 156
6.6.1 Charge Point configuration
These screens allow the configuration of the Charge Point parameters.
6.6.1.1 General tab
Charge Point configuration– General
Charge Point information
ID:
Unique ID of the Charge Point. In ISO 15118-2, the ID of the Charge
Point is called EVSE-ID. According to ISO 15118-2, it is a globally unique
identifier containing an octet string. In communication with the Electric
Vehicle, the Charge Point ID will be concatenated with the Socket ID to
receive the EVSE-ID.
[default value: Charge Point ID]
Name:
Human-readable name of the Charge Point for presentation purposes.
[default value: Charge Point ID]
Model:
Model name of the Charge Point.
Display values:
 KeContact M10