Keba KeContact Series - Meter Readings Configuration

Load management program
146 / 156
6.9.9.3 Configure Central system interface - Meter readings
This screen is for the configuration of the transfer of meter readings.
Configure OCPP Interface - Central system interface Meter Readings
Identification
Interface name:
Identification name of the interface.
Meter reading transfer parameters
Send immediately?
Send the Meter readings immediately after they have been collected
(checkbox checked) or store until the current Meter value send interval
has passed (unchecked).
Send every x seconds:
Interval (in seconds) between sending of two sets of Meter readings using
the Host Interface. The first interval starts at midnight.