Keba KeContact Series - Wallbox Operation Tab

Load management program
56 / 156
6.5.2.3 Wallbox Operation tab
Wallbox details – Wallbox operation
Identification
Wallbox Number:
The drop down box shows the socket number of all Wallboxes that are
visible at the home screen.
If the user changes the Wallbox number, the screen is shown for the
Wallbox selected by the user. If no Wallbox is passed to the screen,
Wallbox 1 will be selected.
EVSE-ID for ISO 15118:
ID of the Wallbox to be used when communicating with the Electric Vehi-
cle. The Charge Point ID will be concatenated with the Socket ID to re-
ceive the EVSE-ID.
Wallbox operating mode:
Describes whether the Wallbox allows Mode 3 charging controlled by
basic signalling, charging controlled by high-level communication or both.
Values:
 Only basic signalling (Mode 3 only): Only Mode 3 charging controlled
by basic signalling according to IEC 61851-1 is possible.
 Only ISO 15118:
Only vehicles using high-level communication can be charged.
 Combined mode: Both Mode 3 charging and charging with high-level
communication is supported.