Keba KeContact Series - Page 55

Load management program
55 / 156
Details
Firmware version
Version of the firmware deployed at the Wallbox.
Maximum available current:
Maximum energy level available by charging at the Wallbox (in Ampere).
Number of phases:
Number of phases supported by the Wallbox (must be 1 or 3).
Phase used:
The phase to which the socket is connected for single-phase charging.
Display values:
 L1, L2, L3.
Fixed cable?
Wallbox with fixed cable:
Display values:
 Yes / No.
IP address (Wallbox):
IP address of the Wallbox.
Values:
192.168.25.xxx (where xxx is the Socket ID)
Ventilation supported?
Indicates whether ventilation is supported.
Display values:
 Yes / No.
Requires authorization?
Indicates whether authorization is enabled at the Wallbox.
Display values:
 Yes / No.