Keba KeContact Series - 7 Appendix; Glossary; List of Abbreviations

Appendix
150 / 156
7 Appendix
7.1 Glossary
Charge Point is a technical system that can be used to charge one or more electric vehicles (one or more
outlets).
M10 system is a charge point for fleets of electric vehicles consisting of hardware and software developed
by KEBA AG and specified in this document.
High-Level Communication is used for the communication between charge point and electric vehicle based
on ISO 15118 or a similar communication protocol.
KeContact LAN is the local area network that connects the charge points, electric vehicles and the KeCon-
tact M10.
KeContact M10 is an industrial PC developed and marketed by KEBA AG. It is used as the central man-
agement component (hardware and software).
MAC address is a unique identifier assigned to network interface components such as Ethernet cards.
Public LAN is the term used in this document for the local area network that connects the KeContact M10
with the public internet or the intranet of the organization that is operating the load management system.
Wallbox is the KeContact P20 charging station (with one outlet). The Wallbox sometimes is also called
“Socket” in association with the M10.
7.2 List of Abbreviations
CP
Control Pilot
DSO
Distribution System Operator
EV
Electric Vehicle
EVSE
Electric Vehicle Supply Equipment
GP
GreenPHY
GUI
Graphical User Interface
LM
Load Management
LMC
Load Management Controller
NAT
Network Address Translation
NEK
Network Encryption Key
NMK
Network Membership Key
OCPP
Open Charge Point Protocol
PDC
Power Distribution Controller
PLC
Power Line Communication
PEV-ID
Unique identifier of the Electric Vehicle
PWM
Pulse Width Modulation
RFID
Radio Frequency Identification
VNC
Virtual Network Communication