Load management program
75 / 156
Typical workflow: Enable/ Disable Authorization (Charge Point)
Press the [Configuration] button in the toolbar at the bottom of the screen. The charge
point configuration screen appears.
Select the tab “Authorization”.
Check or uncheck the checkbox "Authorization enabled". If the checkbox is unchecked, authoriza-
tion for all Wallboxes will be disabled. Already authorized charging sessions will not be affected
by the change of the authorization policy of the Wallbox.
Press the [Save] button to save the settings.
Return to the home screen by clicking on the [HOME] button .
6.6.1.4 Metering and Power control tab
Charge Point configuration – Metering and Power control
To Next Page
Loading...
