Important information
6 / 156
1 Important information
1.1 Safety instructions
WARNING!
Electrical hazard!
For assembly and installation of the individual components (Charge Point, KeContact
M10 etc.), please follow the instructions and safety instructions in the corresponding
manuals.
1.2 Intended use
KeContact M10 Load Management is a system solution that allows the configuring and managing of up to 15
KeContact P20 (c-series) Wallboxes. A load management with different profiles can be realised with the
KeContact M10.
Only KEBA approved devices (Wallboxes) may be connected to the closed KeContact LAN.
The correct use of the devices in all cases includes observing the ambient conditions for which the devices
are developed.
The instructions contained in this manual must be precisely followed in all circumstances. Failure to do so
could result in the creation of potential sources of danger or the disabling of safety features.
Apart from the safety instructions given in this manual, the safety precautions and accident prevention
measures appropriate to the situation in question must also be observed.
To Next Page
Loading...
