Keba KeContact Series - Page 25

Hardware installation
25 / 156
Description of the MMI menu items (Flow diagram)
[DD.MM.YY] [HH:MM] … Date and time since the last start of the KeContact M10 (will not be refreshed).
DVM menu
The DVM (= Device Manager) contains the central management of all device
services.
Start DVM
Starts the DVM (Device Manager). Required if the DVM was stopped via the MMI
menu.
Stop DVM
Stops the DVM (Device Manager).
Rescan sockets
„Rescan sockets“ is required to install the connected sockets
(the detection is triggered).
Sockets count
Shows the number of the installed sockets.
Restart system
Restarts the KeContact M10.
Shutdown system
Shutdown of the KeContact M10.