Load management program
120 / 156
Disk space occupied by firmware version packages (in MB).
Disk space occupied by log files download packages (in MB).
Disk space occupied by metering archives (in MB).
Disk space occupied by software version packages (in MB).
Most recent housekeeping:
Timestamp of the most recent housekeeping run.
Press the [Start] button to start the housekeeping process immediately.
The standard housekeeping parameters will be used.
To selectively delete software versions, firmware versions, meter value
archives, log files archives and diagnostics archives, the screens to man-
age those artefacts can be used.
Typical workflow: Starting the housekeeping process manually
Press the [Management] button in the toolbar. The Management screen (Charging Session
Management) appears.
Press the menu button [Housekeeping] at the left side of the screen. The housekeeping screen
appears. Review the current state of the disk usage at the KeContact M10.
If required, go to the tab [Housekeeping Parameters] to change the parameters for the house-
keeping run. Change the parameters for the housekeeping run and press “Save”. Go back to tab
“Start Housekeeping”.
Start the housekeeping process by pressing the [Start] button.
The housekeeping process runs in the background and might need a longer time. There is no
immediate feedback.
Return to the home screen by clicking on the [HOME] button .
To Next Page
Loading...
