Keba KeContact Series - Page 40

Load management program
40 / 156
Status:
Status of the Charge Point.
Display values:
 Available:
Everything is functional and at least one Socket is not occupied
and/or unavailable.
 Occupied:
All Sockets are used and/or unavailable.
 Degraded:
There is a failure on any of the Charge Point devices or Sockets.
 Faulted:
The Charge Point (and not only a Socket) has a fatal error.
 Unavailable:
The Charge Point is not available for operation.
Model:
Model name of the Charge Point.
Display values:
 KeContact M10
Vendor:
Vendor name of the Charge Point.
General information
Charge Point operating
mode:
Describes whether the Charge Point allows Mode 3 charging controlled
by basic signalling, charging controlled by high-level communication or
both.
Maximum current Charge
Point:
Maximum available current (in Ampere) that is available at the Charge
Point.
Nominal voltage:
Voltage (in Volt) used for calculations of power. Refers to a single phase
(e.g. 230V in continental Europe).
Authorization enabled?
Indicates whether authorization is enabled at the Charge Point.
Internet access?
Indicates whether internet access is possible for the Electric Vehicle at
the Charge Point which is using high-level communication ISO 15118.
User interface
Measurement system:
Shows the selected measurement system (Metric system, US measure-
ment system).
Time zone:
Shows the selected Time zone (GMT).
Language:
Shows the selected user interface language.