Keba KeContact Series - Page 45

Load management program
45 / 156
Authorization [only ISO 15118 relevant]*
Authorization enabled?
Indicates whether authorization is enabled at the Charge Point.
Learns charging token?
Indicates whether a Charging Token can be generated, if an Electric Ve-
hicle plugs into a Socket with enabled Authorization.
Note. A creation of Charging Tokens will only be done for some types of
Charging Tokens such as PEV-IDs.
Automatically accepts token?
Indicates whether a Charging Token is generated by plugging in an Elec-
tric Vehicle into a Socket with enabled Authorization.
Automatic acceptance dura-
tion:
Default value for the number of days until the expiration of a Charging
Token that will be automatically created.
Default expiry period:
Default value for the number of days a Charging Token will be considered
accepted if no expiration date is delivered to the Charge Point when au-
thenticating the Charging Token.
(*) This options are only active if “Authorization enabled?” = “Yes”.
Power line communication
Uses public NMK?
[only ISO 15118 relevant]
Indicates whether the Charge Point uses the public NMK or the private
NMK for the communication with the Wallboxes.
Please note:
If authorization is enabled and the Charge Point is operating in combined mode, an Electric Vehicle which is
charging with basic signalling will charge 30 seconds until charging will be stopped if no authorization has
been done. Within the 30 seconds, a possible high-level communication can be established.