Keba KeContact Series - Page 64

Load management program
64 / 156
Session
Session ID:
Unique identifier of the Charging Session.
Wallbox number:
Socket number of the Wallbox.
Session start time:
Point in time when the Charging Session has started.
Session end time:
Point in time when the Charging Session has ended.
Session history table
History type:
The most important types of history entries.
Display values:
 Start session
A Charging Session has started.
 Resume session
A charging session has been resumed by the Electric Vehicle.
 End session
A Charging Session has ended.
 Start transaction
A Charging Transaction has started.
 Waiting authorization
The Wallbox waits for authorization.
 End transaction
A Charging Transaction has ended.
 Power exceeded
The Electric Vehicle has drawn more power than assigned in the
Charging Profile.
 No ventilation
The Electric Vehicle has requested ventilation, but the socket doesn't
support ventilation.
Time:
Timestamp of the entry into the session history.
Meter reading:
Meter reading in the transaction history. Might be different from attributes
depending on the type of transaction.
Termination:
Termination reason at the session history. Might be either “Termination
Reasons Session” or “Termination Reason Transaction” depending on
the type of history entry.
Details:
Detailed information contained in the session history.
It will be populated with additional information such as "Contract ID" for
the start of a session or the measured current in case of exceeding the
assigned current.