Keba KeContact Series - Page 82

Load management program
82 / 156
Identification
Wallbox Number:
The drop down box shows the socket number of all Wallboxes that are
visible at the home screen.
If the user changes the Wallbox number, the screen is shown for the
Wallbox selected by the user. If no Wallbox is passed to the screen,
Wallbox 1 will be selected.
Model name Wallbox:
Model name of the Wallbox.
Display value:
 KeContact P20
Wallbox serial number:
Serial number stored in the EPROM of the Wallbox.
EVSE-ID for ISO 15118:
ID of the Socket to be used when communicating with the Electric Vehi-
cle. The Charge Point ID will be concatenated with the Socket ID to re-
ceive the EVSE-ID.
Details
Firmware version
Version of the firmware deployed at the Wallbox.
Maximum available current:
Maximum energy level available by charging at the Wallbox (in Ampere).
Number of phases:
Number of phases supported by the Wallbox (must be 1 or 3).
Phase used:
The phase to which the Wallbox is connected for single-phase charging.
Display values:
 L1, L2, L3.
Fixed cable?
Wallbox with fixed cable:
Display values:
 Yes / No.
IP address (Wallbox):
IP address of the Wallbox.
Values:
192.168.25.xxx (where xxx is the Socket ID)
Ventilation supported?
Indicates whether ventilation is supported.
Display values:
 Yes / No.
Requires authorization?
Indicates whether authorization is enabled at the Wallbox.
Display values:
 Yes / No.