Kemper 345plus - Page 48

Attaching to a Claas forage harvester
KM00321,0000340 -19-22OCT14-2/8
Continued on next page KM00321,0000340 -19-22OCT14-3/8
2. On the rear of the header drive, carefully force out the
cap (A) using a 35 mm dia. shaft.
A—Cap
KM223740 —UN—22OCT14KM223741 —UN—22OCT14
3. Screw threaded rod (B) into u.j. shaft, adjust to 225
mm (8.86 in.) (X) and counterlock with hex. nut (A).
A—Hex. Nut
B—Threaded Rod
X—225 mm (8.86 in.)
KM1000872 —UN—26MAY09
20-21
031519
PN=48