Kemper 360 - Gathering, Cross Feed and Feed Drum Radial­pin Clutches

Service
OUCC002,00027EC 1918SEP071/1
Gathering, Cross Feed and Feed Drum
RadialPin Clutches
General Information
All the feed drums are equipped with radialpin clutches to
protect the drive elements against overloading.
Checking the radialpin clutches
Gathering drum radialpin clutches (A) are accessible
from the inside of the drum. Once a year, clean free space
over drum radialpin clutch.
Cross feed and feed drum radialpin clutches (B) and (C)
are integrated into the transmissions and do not require
particular maintenance.
NOTE: 330 harvesting unit is not equipped with
cross feed drums (B).
ZX012961 —UN—26NOV97ZX012962 —UN—26NOV97
507
040810
PN=102