Kemper 360 - Corn Harvesting ­ down Crop

Operation of the Rotary Harvesting Unit
KM00321,000027E 1919FEB101/1
Corn Harvesting  Down Crop
By driving round the field once, the operator will get an
idea of which direction works best for harvesting the crop.
Observe how the rotary harvesting unit feeds in the crop.
If possible, approach the crop at right angles to the
direction it is lying in.
Install stalk lifters (A) on each small divider (B). Parts are
available through the spare parts channel.
Drive fast into the crop with the gathering drums at the
lowest possible speed (38 to 44 rpm).
Thus the most even crop flow is obtained.
ZX012950 —UN—26NOV97ZX012948 —UN—17APR98
303
040810
PN=55