Kemper 360 - Attaching to a KRONE Forage Harvester; Compatibility Chart; Channel Width Adjustment

Attaching to a KRONE Forage Harvester
KM00321,000025D 1917FEB101/1
Continued on next page KM00321,0000261 1917FEB101/2
Compatibility Chart
CAUTION: Before attaching the rotary
harvesting unit to a forage harvester, carry
out the steps included in Section Prepare
the Rotary Harvesting Unit.
The chart below gives the compatibility between rotary
harvesting units and forage harvesters.
Compatibility rotary harvesting unit/forage harvester
345.......................................................................................
BIG X 500
360.......................................................................................
BIG X V8
BIG X 500
BIG X 650
375.......................................................................................
BIG X V8
BIG X V12
BIG X 650
BIG X 800
BIG X 1000
Channel Width Adjustment
The channel width of forage harvester and rotary
harvesting unit must be the same.
Preset channel width
Preset channel width (X) is 648 mm (2 ft. 1.51 in.).
X—Preset channel width
KM1001085 —UN—29JAN10
351
040810
PN=46