Kemper 360 - Connect Hydraulic Hoses; Connect Drive Shaft

Attaching to a KRONE Forage Harvester
KM00321,0000278 1918FEB101/1
KM00321,0000277 1918FEB101/1
Connect Hydraulic Hoses
Connect hydraulic hoses (A) for folding the rotary
harvesting unit to the relevant hydraulic connections on
the left side of the forage harvester.
A—Hydraulic hoses
KM1001115 —UN—18FEB10
Connect Drive Shaft
Connect drive shaft (A) to forage harvester drive and to
rotary harvesting unit input gear box.
NOTE: To facilitate installation of the u.j. shaft, loosen
locking screw (B) and slide protective sleeve
(C) on u.j. shaft to the rear. After installation of
the u.j. shaft, reposition protective sleeve (C)
and attach it with locking screw (B).
CAUTION: To avoid serious injury, make sure that
pulltype locks of drive shaft are engaged properly
in the provided grooves on the splined shafts.
KM1001114 —UN—18FEB10
A—Hydraulic hoses
354
040810
PN=49