Kemper 360 - Connecting Drive Shafts and Hoses

Attaching to a CLAAS Forage Harvester
KM00321,0000179 1927MAY091/1
Continued on next page KM00321,0000268 1909FEB101/2
Connect Hydraulic Hoses
Connect hydraulic hoses (A) to forage harvester using
quick couplers.
A—Hydraulic hoses
KM1000866 —UN—26MAY09
Connect the Drive (Forage Harvester
Types 491 and 492)
330 and 345 rotary harvesting units
1. Slide u.j. shaft (B) on drive shaft (A) of the harvesting
unit drive on the forage harvester.
2. Slide u.j. shaft (B) on drive shaft (C) of the rotary
harvesting unit.
IMPORTANT: Make sure the quicklock pins on both
sides of the u.j. shaft engage.
A—Drive shaft
B—U.j. shaft
C—Drive shaft
KM1001096 —UN—09FEB10KM1001097 —UN—09FEB10
257
040810
PN=32