Kemper 360 - Weekly Service; End of Season Maintenance

Lubrication and Maintenance
KM00321,0000297 1924FEB101/1
OUCC002,00027E9 1918SEP071/1
Weekly Service
Perform all service work listed under Daily Service in this
Section.
Check if all screws are tightened to the specified torque
(see table).
Remove foreign bodies from the feeding and cutting area.
Clean clutch claws and spring assembly of the outer
folding sections.
Check if shift pawl of clutch claws moves freely.
On rotary harvesting units with watercooled slip clutch
(option for models 345 and 360, standard for model 375),
check the main drive slip clutch for coolant leakage. In
case of escaping fluid, the slip clutch must be removed
and repaired. Contact your KEMPER dealer.
End of Season Maintenance
ZX1040581 —UN—12APR07
360 Rotary Harvesting Unit Shown
Clean and preserve the harvesting unit. Clean cavities (A)
over the gathering drum radialpin clutches.
Change the oil and lubricate the harvesting unit.
Check all components for wear and order any spare parts
that may be required in good time for the coming season.
4510
040810
PN=95