Kemper 360 - Technical Retrofitting to Whole­crop Silage (WCS) Harvest

Operation of the Rotary Harvesting Unit
Continued on next page OUCC002,00027FC 1919SEP071/6
Technical Retrofitting to WholeCrop
Silage (WCS) Harvest
In case of harvesting wholecrop silage, install this special
kit which is available through spare parts channel as
follows:
1. Remove the two dividers between the two outer
gathering drums (left and righthand sides) together
with the pillow block and replace them with short WCS
tips (A).
2. Align the two outer divider tips in their upper position
and screw them to the smaller angle piece (B).
A—WCS tips
B—Angle
ZX1041108 —UN—19SEP07ZX1041109 —UN—19SEP07
306
040810
PN=58