Kemper 360 - Removal of Slip Clutch

Service
KM00321,000022D 1901SEP091/6
KM00321,000022D 1901SEP092/6
Continued on next page KM00321,000022D 1901SEP093/6
Removal of Slip Clutch
1. Remove cover (A). First take out screws (B).
A—Cover B—Screws
KM1001004 —UN—01SEP09
2. Open the snap rings and push them back on the
splined shaft.
KM1001005 —UN—01SEP09
3. Push the splined shaft in one slip clutch in such a way
that it is completely removed from the other slip clutch.
KM1001006 —UN—01SEP09
503
040810
PN=98