Kemper 360 - Attaching to NEW HOLLAND and CASE Forage Harvesters

Attaching to NEW HOLLAND and CASE Forage Harvesters
KM00321,0000260 1911FEB101/1
Attaching to NEW HOLLAND and CASE
Forage Harvesters
1. Slowly drive the forage harvester forward until
mounting rail (A) lies in the attaching frame of the
rotary harvesting unit. Then raise the front shield and
engage the rotary harvesting unit.
2. At left and right, engage retainer hooks (B) into the
receiver openings of the attaching frame provided for
them.
3. At left and right, tighten retainer hooks using threaded
rod (C).
A—Mounting rail
B—Retainer hook
C—Threaded rod
KM1000878 —UN—27MAY09KM1001106 —UN—11FEB10KM1001107 —UN—11FEB10
305
040810
PN=43