Kemper 360 - Harvesting Short­stemmed Corn; Whole Crop Silage

Operation of the Rotary Harvesting Unit
KM00113,0000026 1930OCT091/1
Continued on next page KM00321,000027F 1919FEB101/2
Harvesting ShortStemmed Corn
When harvesting shortstemmed corn, approach the crop
at full field speed.
Set the feed bars (A) lower so that the stalks do not
approach the feed rolls vertically.
A—Feed bars
ZX012951 —UN—26NOV97
Feed Bars (345, 360)
ZX1040574 —UN—12APR07
Central Feed Bars (375)
Whole Crop Silage
Instructions for field operation
Good results can be achieved, if the following instructions
are observed and conditions are good (e.g. dry crop).
The standing crop should be at least kneehigh.
Use only sharp blades and undamaged cleaners.
If not equipped, install twospeed gear box (option).
Select a higher gathering drum speed (48 to 52 rpm).
ZX024252 —UN—07MAR01
304
040810
PN=56