Kemper 360 - Page 73

Operation of the Rotary Harvesting Unit
KM00321,0000285 1922FEB102/4
Continued on next page KM00321,0000285 1922FEB103/4
Cutterhead with 36 knives (type 494)
Twospeed gear box (III) for short length of cut (option)
KM1001123 —UN—22FEB10
I—Length of cut, number of knives II—Lengthofcut
transmission, forage
harvester
III—Rotary harvesting
unit drive
IV—Gathering drum
speed
2x18 knives 2x9 knives
Gear Gear
rpm
2.7 mm 5.4 mm 2 41
3.3 mm 6.6 mm 2 41
4.0 mm 8.0 mm 2 41
4.7 mm 9.4 mm 2 41
5.3 mm 10.6 mm 1 51
6.0 mm 12.0 mm 1 51
6.7 mm 13.4 mm
1
1 51
7.3 mm 14.6 mm 2 1 51
Cutterhead with 24 knives (type 494)
Twospeed gear box (III) for normal to long length of
cut (standard)
KM1001123 —UN—22FEB10
I—Length of cut, number of knives II—Lengthofcut
transmission, forage
harvester
III—Rotary harvesting
unit drive
IV—Gathering drum
speed
2x12 knives 2x6 knives
Gear Gear
rpm
6 mm 12 mm 1 51
7 mm
14 mm 1 51
8 mm 16 mm 1 51
9 mm 18 mm 1 51
10 mm 20 mm
1
2 64
11 mm 22 mm 2 64
12 mm 24 mm 2 64
13 mm 26 mm 2 64
14 mm 28 mm
2
2 64
3021
040810
PN=73