Kemper 360 - Page 75

Operation of the Rotary Harvesting Unit
KM00321,0000286 1922FEB102/3
KM00321,0000286 1922FEB103/3
The rotary harvesting unit is powered via drive shafts
(A) and (B) on the lefthand side (seen in the direction
of travel).
A—Drive shaft B—Drive shaft
KM1000891 —UN—08JUN09
On the KEMPER rotary harvesting unit, 1st gear and 2nd
gear are shifted directly at the drive case.
IMPORTANT: Drum speed must not exceed 65 rpm.
KM1001124 —UN—22FEB10
3023
040810
PN=75