Kemppi X8 User Manual

X8 MIG WELDER 2.5 Operation
Creating new memory channel settings
When you create a welding program to a memory channel, always select an existing program as a
basis for the modifications.
Proceed as follows:
1.
Go to Channels and select a memory channel where to start modifications.
2.
Press the green button to open the Actions menu.
3.
Select Save to and press the green button.
OPERATING MANUAL | EN 120
©
KEMPPI 2017 | 1817

Kemppi X8 Specifications

General

Brand	Kemppi
Model	X8
Category	Welding System
Language	English