X8 MIG WELDER 2.5 Operation
6.
Move focus to OK and press the green button to return to the Channel view.
2.5.3.2 Using digital WPSs
When you select a digital WPS, the welding machine settings are automatically adjusted
accordingly.
Note:
This feature is only available if the welding machine is registered in Kemppi's WeldEye
cloud service. For more information, see Introduction to WeldEye for welding procedure
and qualification management on page 10.
OPERATING MANUAL | EN 124
©
KEMPPI 2017 | 1817
To Next Page
Loading...
