X8 MIG WELDER 2.5 Operation
2.
To see the list of available WPSs, press the green button. The WPS list opens.
Figure 26: Advanced mode Figure 27: Basic mode
3.
Move the focus to the WPS that you want to activate.
4.
Depending on the mode of Control Pad, select one of the following options:
a) If the Control Pad is in the Advanced mode, press the green button to open the Actions
menu. Select Activate WPS.
OPERATING MANUAL | EN 126
©
KEMPPI 2017 | 1817
To Next Page
Loading...
