X8 MIG WELDER 2.5 Operation
Figure 32: Voltage sensing cable
Using WiseRoot+
WiseRoot+ is a synergic MIG/MAG process optimized for open-gap root pass welding. The
process is based on precise measurement of voltage between the welding gun nozzle and the
workpiece. The measurement data serves as input for the current control. The process is suitable
for root pass welding in all positions, and provides a smooth and spatter-free arc.
To adjust the welding power / wire feed speed, in the Control Pad's Welding view, turn the left
knob.
To fine tune the heat while welding, in the Control Pad's Welding view, turn the right knob.
Figure 33: WiseRoot+ Welding view
OPERATING MANUAL | EN 144
©
KEMPPI 2017 | 1817
To Next Page
Loading...
