X8 MIG WELDER 2.5 Operation
• Dynamics: -10...+10. Adjusts the short circuit behavior. On the minus side, the arc is softer (less
spatter). On the plus side, the arc is harder (the arc is more stable).
• StartPower: -30...+30. Adjusts the power level for arc ignition.
• StartLevel: -30...+30. Finetunes the arc length for arc ignition.
• StopPower: -30...+30. Adjusts the power level for arc stop.
Wise features
Kemppi Wise features improve the quality of welds. For more information on Wise products, visit
www.kemppi.com.
Introduction to WiseFusion
The WiseFusion welding function enables adaptive arc length control, which keeps the arc
optimally short and focused. WiseFusion increases the welding speed and penetration and
decreases heat input. WiseFusion can be used throughout the power range (short arc, globular
arc, spray arc and pulsed arc). WiseFusion is compatible with 1-MIG, Pulse and DPulse welding
processes.
Using WiseFusion
+
To take WiseFusion into use, select Settings > Wise features > WiseFusion.
To adjust the welding power / wire feed speed, in the Control Pad's Welding view, turn the left
knob.
To fine tune heat output, in the Control Pad's Welding view, turn the right knob.
Figure 35: WiseFusion Welding view
OPERATING MANUAL | EN 146
©
KEMPPI 2017 | 1817
To Next Page
Loading...
