Kemppi X8 User Manual

X8 MIG WELDER 2.4 Installation
2.
Pull the release lever at the front of the wire feeder rotating plate, and turn the top sideways
to allow access to the bottom half.
3.
Attach the bottom of the wire feeder rotating plate to the power source with four screws (1)
and washers (2).
OPERATING MANUAL | EN 36
©
KEMPPI 2017 | 1817

Kemppi X8 Specifications

General

Brand	Kemppi
Model	X8
Category	Welding System
Language	English